Nomad
STOMPING GAPS AND STAMPING PASSPORTS
Load up the van, hit the road, climb a mountain, hammer it back down, huck the gap, throw the bike back in the van, and drive to the bike park for laps on laps. Hell, you could even roll up to the start line of the world’s wildest races. The Nomad’s forte is being ready and willing to go wherever, whenever. All it needs is a rider willing to press send.

ALL THE TRAVEL AND MX WHEELS
A bigger wheel up front, optimized geometry for good times, Glovebox storage, and the biggest-hitting VPP™ suspension come together to create a bike that inspires confidence in going wherever, whenever, and tackling whatever’s in your way.

SINGLE-CROWN, DOUBLE BLACK
VPP™ suspension strikes the ideal balance between pedaling efficiency and bump-chomping prowess. The Nomad excels at absorbing the biggest hits, allowing riders to charge harder and with greater confidence in the toughest terrain. Plus, its efficiency means reaching the highest, best trails is never a chore.
Nomad X0 AXS RSV
CC Carbon-Rahmen, elektronischer SRAM X0 Transmission-Antrieb, Highend Fahrwerk, starke SRAM Maven Silver Stealth Bremsen. Und die legendären RESERVE Carbon-Felgen mit Industry Nine Naben.
Nomad X0 AXS
CC Carbon-Rahmen, elektronischer SRAM X0 Transmission-Antrieb, Highend Fahrwerk, Industry Nine Naben und starke SRAM Maven Silver Stealth Bremsen
Nomad 90
Ein solides Upgrade ... Hochwertigere Naben, Steuersatz und Sattelstütze. FOX FLOAT X Dämpfer, mechanischer SRAM 90 TRANSMISSION Antrieb, SRAM MAVEN Bremsen und RESERVE AL Felgen.
Nomad 70
Basismodell mit denselben Reifen und großen Bremsscheiben wie alle NOMAD-Modelle. Mechanische SRAM 70 TRANSMISSION Schaltung, FOX FLOAT X Dämpfer und RESERVE AL Felgen.

Deals On Nomads
Current OffersDesign Details
Nomad
Größe & Geometrie
Wenn Du zwischen zwei Rahmengrößen liegst, empfehlen wir, dass Du beide Optionen testest. Als Anhaltspunkt kannst Du die Reach- und Stack-Werte mit Deinem aktuellen Bike oder anderen bekannten Bikes vergleichen, auf denen Du Dich wohl fühlst. Wenn keine Testfahrt möglich ist, kannst Du Dich auch an den folgenden Tipps orientieren:
s | m | l | xl | xxl | |
---|---|---|---|---|---|
Reach (Hi/Lo) | 430/427 | 455/452 | 475/472 | 495/492 | 520/517 |
Stack (Hi/Lo) | 616/618 | 625/627 | 638/640 | 656/658 | 670/672 |
C. Lenkwinkel (Hi/Lo) | 63.8/63.5 | 63.8/63.5 | 63.8/63.5 | 63.8/63.5 | 63.8/63.5 |
D. Sitzwinkel (Hi/Lo) | 77.2/77 | 77.4/77.2 | 77.9/77.6 | 77.8/77.5 | 77.7/77.5 |
E. Radstand (Hi/Lo) | 1209/1209 | 1239/1240 | 1269/1270 | 1301/1302 | 1336/1337 |
Front Center (Hi/Lo) | 770/770 | 799/799 | 826/826 | 855/855 | 886/886 |
G. Hinterbaulänge (Hi/Lo) | 439/440 | 440/441 | 443/444 | 446/447 | 450/451 |
H. Tretlagerhöhe (Hi/Lo) | 346/343 | 346/343 | 346/343 | 346/343 | 346/343 |
BB Drop Front (Hi/Lo) | 27/30 | 27/30 | 27/30 | 27/30 | 27/30 |
BB Drop Rear (Hi/Lo) | 8/11 | 8/11 | 8/11 | 8/11 | 8/11 |
J. Überstandshöhe (Hi/Lo) | 709/705 | 716/713 | 723/719 | 722/717 | 725/720 |
Steuerrohrlänge | 90/90 | 100/100 | 115/115 | 135/135 | 150/150 |
Sitzrohrlänge | 380/380 | 405/405 | 430/430 | 460/460 | 500/500 |
M. Oberrohrlänge (Hi/Lo) | 570/571 | 594/594 | 612/613 | 637/638 | 666/667 |
Nomad
Setup & Support
Egal, ob Du stolzer Besitzer eines Nomad bist oder Dich einfach nur für alle Details interessierst - hier wirst Du fündig.

label | part_number | quantity | name | blurb |
---|---|---|---|---|
A | 29-23753 | 1 | Upper Link | |
B | 11-12681 | 2 | 6900-2RS Bearing | |
C | 26-15533 | 2 | M10x3 Washer | Apply grease to inner surface |
D | 26-11612 | 2 | Bearing Dust Shield | Apply grease to inner surface |
E | 11-12218 | 2 | 6902-2RS Max Bearing | |
F | 26-17013 | 1 | 15x40.25 Bearing Spacer |

label | part_number | quantity | name | blurb | torque |
---|---|---|---|---|---|
A | 29-23751 | 1 | Lower Link | ||
B | 11-17708 | 4 | 6902-1ZR Bearing | ||
C | 26-11612 | 4 | Bearing Dust Shield | Apply grease to inner surface | |
D | 26-19126 | 1 | 15x28 Bearing spacer | ||
E | 26-17013 | 1 | 15x40.25 Bearing Spacer | ||
F | 26-12678 | 1 | M6 Grease Fitting | 9 Nm | |
G | 26-15532 | 1 | M5x5 Set Screw | Apply Loctite 242 to threads, titghten until flush |

label | part_number | quantity | name | torque | blurb |
---|---|---|---|---|---|
A | 26-22843 | 1 | Glovebox lid | ||
B | 26-25333 | 1 | Glovebox bezel | ||
C | 26-23284 | 4 | M3x8 BHCS | 0.5 Nm | Apply Loctite 242 to threads |
D | 30-23225 | 2 | Glovebox nut | ||
E | 26-22358 | 1 | M3x6 | 0.6 Nm | Apply Loctite 242 to threads |
F | 30-22620 | 1 | Storage Bulkhead | Install inside Downtube |

label | part_number | quantity | name | blurb | torque |
---|---|---|---|---|---|
A | 08-22208 | 1 | Rear axle 12x168.5 | Apply grease to shaft and threads | |
B | 23-23491 | 1 | SCB UDH | Interchangeable with Sram UDH | |
C | 26-23492 | 1 | SCB UDH screw | Reverse thread | 20 Nm |
D | 30-20361 | 1 | Chainstay Protector | ||
E | 26-15939 | 1 | M3x12 BHCS | Apply grease to treads | 0.5 Nm |
F | 30-21453 | 1 | Seatstay Protector | ||
G | 49-21567 | 1 | Lower Link Fender | ||
H | 26-18382 | 2 | M4x12 BHC | Apply grease to treads | 0.65 Nm |

label | part_number | quantity | torque | name | blurb |
---|---|---|---|---|---|
A | 26-20122 | 2 | 16 Nm | M10x23 Screw | Apply Loctite 242 to threads only, apply grease to shaft only |
B | 26-22461 | 2 | 20 Nm | M8x45 Shock Bolt | Apply Loctite 242 to threads |
C | 26-21452 | 1 | M8x2 Flip Chip NDS | Apply grease to surface | |
D | 26-21451 | 1 | M8x2 Flip Chip DS | Apply grease to surface | |
E | 26-15947 | 2 | 9 Nm | M6x20 SHCS | Apply Loctite 242 to threads |
F | 26-11817 | 2 | M6 Washer | ||
G | 26-15633 | 2 | M6 Tapered Washer | Apply grease to surface | |
H | 08-22343 | 1 | 20 Nm | Pivot Axle M15x91 | Apply Loctite 242 to threads only, apply grease to shaft only |
I | 08-16292 | 1 | 20 Nm | Pivot axle M15x80.5 | Apply Loctite 242 to threads only, apply grease to shaft only |
J | 08-16291 | 1 | 20 Nm | Pivot axle M15x68.5 | Apply Loctite 242 to threads only, apply grease to shaft only |

label | part_number | quantity | name | blurb | torque |
---|---|---|---|---|---|
A | 67-19217 | 1 | Head Tube Badge | Clean frame surface, center on headtube | |
B | 30-23750 | 1 | Shuttle Guard Mount | ||
C | 30-22560 | 1 | Shuttle Guard | ||
D | 26-21249 | 2 | M4x8 BHCS | Apply grease to threads | 0.65 Nm |
E | 30-23718 | 1 | Downtube Protector | ||
F | 26-18382 | 2 | M4x12 BHC | Apply grease to treads | 0.65 Nm |
G | 34-20201 | 1 | 36.4 Seat Collar |

Frame Size | Flip Chip | Setup Key | Setup Cog | 30T | 32T | 34T | 36T |
---|---|---|---|---|---|---|---|
Small | High | B | 7 | 116 | 116 | 118 | 118 |
Medium | High | B | 7 | 116 | 116 | 118 | 118 |
Large | High | B | 7 | 116 | 118 | 118 | 120 |
XLarge | High | B | 7 | 116 | 118 | 118 | 120 |
XXLarge | High | B | 7 | 118 | 118 | 120 | 120 |
Small | Low | B | 7 | 116 | 116 | 118 | 118 |
Medium | Low | B | 7 | 116 | 118 | 118 | 120 |
Large | Low | B | 7 | 116 | 118 | 118 | 120 |
XLarge | Low | B | 7 | 118 | 118 | 120 | 120 |
XXLarge | Low | B | 7 | 118 | 118 | 120 | 120 |
Alle Details
Sizing and support for the Nomad

Geometrie& Größe

Setup& Support
“Yes, it’s very good.”
“This is an excellent bike that performs exceptionally well on all the trails I love to ride.”
“If the Megatower is pitched as a privateer enduro race bike where efficiency and speed against the clock is the priority, the Nomad feels very much like a seasonaire’s bike with a focus on being built for reliable fun over countless bike park laps”
SO WHAT'S THE NOMAD ALL ABOUT?

SO WHAT'S THE NOMAD ALL ABOUT?
CAN'T BE BOTHERED TO READ OR STILL LOOKING FOR ANSWERS ON THE NOMAD? WATCH AND LEARN
Also Consider...

The “Not a Trail bike” Trail bike
See the Bronson